Follow Us:

A&C Heating & Plumbing

North & West London’s Trusted Heating and Plumbing Specialists.

Home Gas Services Gas Safety Checks Gas Safety Certificate Willesden

Gas Safety Certificate in Willesden

Need a landlord gas safety certificate (CP12) in Willesden? A&C Heating and Plumbing Ltd carries out annual gas safety checks for landlords, letting agents and homeowners across Willesden, Willesden Green, Kensal Rise, Neasden and Dollis Hill. Every check is done by a Gas Safe registered engineer, at a fixed price confirmed before booking.

We check every gas appliance, flue and the pipework, record the results on your Gas Safety Record and tell you straight away if anything needs attention.

What Is a Gas Safety Certificate (CP12)?

A Gas Safety Certificate – officially a Landlord Gas Safety Record, often called a CP12 – confirms that the gas appliances, fittings and flues in a home were checked by a Gas Safe registered engineer and found safe on the day.

Who needs one?

  • Landlords: a gas safety check every 12 months is a legal duty for every rented home with gas appliances, under the Gas Safety (Installation and Use) Regulations 1998.
  • Letting agents managing a property on the landlord’s behalf.
  • Homeowners: not a legal requirement, but an annual check is the safest way to make sure your boiler, hob and gas fire are working safely. Buyers and their solicitors sometimes ask for a recent record when you sell.

Landlords who do not keep up their gas safety checks can be prosecuted by the Health and Safety Executive. You can check any engineer’s ID on the Gas Safe Register.

Why Choose A&C for Gas Certificates in Willesden?

✅ Gas Safe registered engineers – qualified for domestic gas appliances
✅ Fixed price confirmed before booking – no surprises on the day
✅ Appointment agreed with you – we fit around you, your tenants or your agent
✅ Complete inspection – boiler, cooker, hob, gas fire, flues and pipework
✅ Clear advice – if something fails, we explain why and what it will cost to fix

Letting agents and landlords with several properties in NW10 can book the checks together, so every certificate is renewed on time.

Send us message

    24-Hour EMERGENCY FREEPHONE

    Call Us Now 0779 559 5757

    What Does Our Gas Safety Check Include?

    When we carry out your CP12 check in Willesden, we:

    • Inspect every gas appliance – boiler, cooker, hob and gas fire
    • Check ventilation and the air supply to each appliance
    • Examine flues and chimneys, including flues in ceiling voids
    • Carry out a gas tightness test (checking for leaks)
    • Measure the operating pressure and check safety devices
    • Check the emergency control valve

    If everything passes, you receive your Gas Safety Record once the check is complete. If an appliance is unsafe, we explain the fault, make it safe and quote the repair before any work.

    Gas Safety Certificates for Landlords in Willesden

    Under the Gas Safety (Installation and Use) Regulations 1998, landlords in Willesden must:

    • Have every gas appliance, fitting and flue checked by a Gas Safe registered engineer every 12 months
    • Give existing tenants a copy of the record within 28 days of the check, and new tenants before they move in
    • Keep each record for at least 2 years

    Renewing early: you can have the check done up to 2 months before the current certificate expires and keep the original renewal date, so you do not lose any months.

    📞 Book your landlord gas safety check in Willesden: 0779 559 5757

    How Much Does a Gas Safety Certificate Cost in Willesden?

    A gas safety check is charged at a fixed price confirmed before booking. The price depends on how many gas appliances the property has:

    • Standard gas safety check (boiler and hob): fixed price confirmed before booking
    • Additional appliances (gas fire, cooker, second boiler): included in the fixed price we confirm before booking
    • Repairs found during the check: quoted separately, before any work – see boiler repair in Willesden

    If you also need an annual boiler service, ask when you book and we will confirm the price for both.

    A heating engineer from A&C Heating and Plumbing Ltd conducting a gas safety inspection in a Willesden kitchen, holding a digital analyser and certification clipboard.

    Gas Safety in Willesden Homes: What We Check Most

    Maisonettes and converted flats. Many Edwardian houses in Willesden Green and Kensal Rise are split into upper and lower maisonettes, each with its own boiler. Where a flue runs through a ceiling or boxed-in void, the engineer must be able to see it along its whole length, so the flat needs inspection hatches.

    Boilers in lofts and kitchens. In upper maisonettes the boiler is often in the loft. We need safe access – a fixed ladder, a light and boarding to the boiler – to inspect it properly; without it, the check may have to be rebooked.

    Older gas fires and back boilers. Some houses in Neasden and Dollis Hill still have a gas fire with a back boiler behind it. These are open-flued, so a clear chimney and enough fresh air in the room are essential.

    Carbon monoxide alarms. In rented homes in England, landlords must fit a CO alarm in every room with a fixed combustion appliance, such as a gas boiler or gas fire (gas cookers are exempt). We check this during the visit and tell you if one is missing.

    HMOs and licensed properties. Brent Council runs property licensing schemes covering many private rented homes in NW10. A current gas safety certificate is usually part of the application and renewal.

    Postcodes we cover: NW10 (Willesden, Willesden Green, Kensal Rise, Neasden, Harlesden) and NW2 (Dollis Hill, Cricklewood).

    Other Areas We Cover Near Willesden

    Besides Willesden, we carry out gas safety checks in:

    ➡️ View all Areas We Cover →

    🔗 Related Services in Willesden

    Book Your Gas Safety Certificate in Willesden

    Need a gas safety certificate in Willesden before your current one runs out? Tell us how many gas appliances the property has and we will confirm a fixed price and an appointment time.

    📞 Call us on 0779 559 5757
    📧 Email: info@ac-heating-plumbing.co.uk
    💬 Request a Quote Online

    FAQs – Gas Safety Certificates in Willesden

    How long is a gas safety certificate valid?

    12 months. You can renew up to 2 months early and keep the original renewal date.

    How long does the check take?

    Usually 30 minutes to 1 hour, depending on the number of gas appliances.

    How often must I renew my Gas Safety Certificate?

    For rented homes, the law requires a gas safety check every 12 months. You can have it done up to 2 months early and keep the original renewal date.

    What if an appliance fails the inspection?

    The engineer explains the fault and, if the appliance is unsafe, makes it safe – usually by disconnecting it – with your permission. We then quote the repair before any work starts.

    Can you service my boiler at the same visit?

    Yes. Ask when you book and we will confirm the price for both the boiler service and the gas safety check before the visit.

    My boiler is in the loft – is that a problem for the check?

    No, as long as the engineer can reach it safely. The loft needs a fixed ladder or safe access, a light and boarding to the boiler.

    Our services in Willesden

    Not in Willesden? See all areas we cover in North & West London.

    Need help today? Our Gas Safe registered engineers cover North & West London, with 24/7 emergency call-outs and clear pricing before any work starts.

    ⭐ Rated 4.8/5 on Google · Gas Safe registered · 15+ years’ experience

    📞 Call 0779 559 5757 💬 WhatsApp – reply in 15 min