Follow Us:

Central Heating Installation

Home Heating Services Central Heating Installation

Central Heating Installation in London – New Complete Systems

A new central heating system is a bigger job than swapping a boiler: it means designing the whole system – boiler, pipework, radiators and controls – around your home. A&C Heating and Plumbing Ltd installs complete central heating systems across North and West London, from homes with no gas central heating to full replacements of old, failing systems.

Only need a new boiler on your existing radiators? See boiler installation. Want to improve the system you already have? See central heating upgrades.

🏠 When You Need a Full Central Heating System

A full central heating installation is usually the right choice when:

  • the property has no gas central heating – for example electric storage heaters or room heaters
  • an old back boiler or gravity-fed system needs replacing, not just the boiler
  • the pipework is old, undersized or corroded and keeps leaking or blocking
  • you are adding an extension or loft conversion and the existing system cannot cope
  • you are renovating and want radiators, pipe routes and controls planned from scratch

🔩 What a Complete System Includes

A typical gas central heating system includes:

  • a boiler – combi, system or regular, depending on your home and hot water use
  • pipework run to every room
  • radiators sized for each room (or underfloor heating where it suits)
  • a pump, valves and safety components
  • controls – programmer, room thermostat and radiator valves
  • a hot water cylinder if you have a system or regular boiler

Send us message

    24-Hour EMERGENCY LINE

    Call Us Now 0779 559 5757‬

    🛠️ How a Central Heating Installation Works

    1. Free survey – we look at the property, the gas supply, where the boiler and flue can go and how you use hot water.
    2. Design – we work out the heat each room needs, size the radiators and plan pipe routes to keep disruption low.
    3. Fixed written quote – boiler, radiators, pipework and controls, with the cost confirmed before any work starts.
    4. Installation – we remove and dispose of the old system, then fit the new pipework, radiators and boiler. All gas work is done by Gas Safe registered engineers.
    5. Clean, fill and protect – the system is flushed, filled and treated with inhibitor to protect it from sludge.
    6. Commissioning – we test every radiator and control, notify the installation through Gas Safe and register the manufacturer’s warranty.

    🔥 Choosing the Boiler

    The right boiler depends on the size of your home and how much hot water you use at once:

    • Combi – hot water on demand, no cylinder; suits most flats and smaller houses
    • System boiler with an unvented cylinder – for homes with more than one bathroom
    • Regular boiler with tanks – where the existing layout or water pressure suits it

    We install boilers from leading manufacturers and recommend the model at the survey. The manufacturer’s warranty depends on the model and is registered when we commission the system. Thinking about a low-carbon option instead? See heat pumps.

    📍 Areas We Cover in North & West London

    We proudly serve homes and businesses across:

    North London:

    Barnet • Camden • Edgware • Enfield • Haringey • Kentish Town • Islington • Finchley

    West London:

    Ealing • Hounslow • Acton • Chiswick • Brent • Shepherd’s Bush • Hammersmith • Wandsworth

    ➡️ View all Areas We Cover →

    👷 Why Choose A&C Heating and Plumbing Ltd.?

    • ✅ Gas Safe registered engineers
    • ✅ Free survey and fixed written quote
    • ✅ Radiators sized for each room, not guessed
    • ✅ Guaranteed workmanship and 15+ years’ experience
    • ✅ Rated 4.8/5 on Google

    Related: radiator installation · thermostats and controls · power flushing for existing systems.

    Engineer performing diagnostics on a Vaillant boiler with copper pipework and tools in a bright kitchen space.

    ❓ Central Heating Installation – FAQs

    What is the difference between a new boiler and a new central heating system?

    A new boiler replaces only the boiler and uses your existing pipework and radiators. A new central heating system includes the boiler, pipework, radiators and controls, designed for the whole home.

    Can you install central heating in a home that has never had it?

    Yes, if there is a suitable gas supply. We survey the property, plan the boiler position, flue and pipe routes, and design the radiators for each room.

    How much does a new central heating system cost?

    It depends on the size of the property, the number of radiators and the boiler type. We offer a free survey and a fixed written quote, so you know the full cost before any work starts.

    How long does installation take?

    It depends on the size of the home and how much pipework is needed. We agree a timescale with you in the quote and plan the work to keep disruption to a minimum.

    Do I need a new boiler as well?

    Not always. If your boiler is fairly new and in good condition, we check at the survey whether it can be kept and connected to the new pipework and radiators.

    Do you remove the old system?

    Yes. When we install a new system, we remove and dispose of the old boiler, radiators, tanks and pipework that are no longer needed.

    Planning a new heating system? Call 0779 559 5757 to book a free survey, or send us a message.