Follow Us:

A&C Heating & Plumbing

North & West London’s Trusted Heating and Plumbing Specialists.

Home Gas Services Gas Safety Checks Gas Safety Certificate Islington

Gas Safety Certificate in Islington

Need a landlord gas safety certificate (CP12) in Islington? A&C Heating and Plumbing Ltd carries out annual gas safety checks for landlords, letting agents and homeowners across Islington – Angel, Highbury, Holloway, Barnsbury, Canonbury and Archway. Every check is done by a Gas Safe registered engineer, at a fixed price confirmed before booking.

We check every gas appliance, flue and the pipework, record the results on your Gas Safety Record and tell you straight away if anything needs attention.

What Is a Gas Safety Certificate (CP12)?

A Gas Safety Certificate (CP12) is an official document issued after a qualified engineer inspects your gas installations. It confirms that your appliances, pipework, and flues meet current UK safety standards.

Who needs one?

  • Landlords: a gas safety check every 12 months is a legal duty for every rented home with gas appliances, under the Gas Safety (Installation and Use) Regulations 1998.
  • Letting agents managing a property on the landlord’s behalf.
  • Homeowners: not a legal requirement, but an annual check is the safest way to make sure your boiler, hob and gas fire are working safely. Buyers and their solicitors sometimes ask for a recent record when you sell.

Landlords who do not keep up their gas safety checks can be prosecuted by the Health and Safety Executive. You can check any engineer’s ID on the Gas Safe Register.

Why Choose A&C Heating and Plumbing Ltd for Gas Certificates in Islington?

✅ Gas Safe registered engineers – qualified for domestic gas appliances
✅ Fixed price confirmed before booking – no surprises on the day
✅ Appointment agreed with you – we fit around you, your tenants or your agent
✅ Complete inspection – boiler, cooker, hob, gas fire, flues and pipework
✅ Clear advice – if something fails, we explain why and what it will cost to fix

Letting agents and landlords with several flats in Islington can book the checks together, so every certificate is renewed on time.

Send us message

    24-Hour EMERGENCY FREEPHONE

    Call Us Now 0779 559 5757

    What Does Our Gas Safety Inspection Include?

    During the Gas Safety Check, we:

    • Inspect all gas appliances (boilers, cookers, fires)

    • Check ventilation and air supply

    • Examine flues and chimneys

    • Carry out a gas tightness test (checking for leaks)
    • Measure the operating pressure and check safety devices
    • Assess emergency control valves

    If everything passes, you receive your Gas Safety Record once the check is complete. If an appliance is unsafe, we explain the fault, make it safe and quote the repair before any work.

    Landlord Gas Certificates in Islington

    Under the Gas Safety (Installation and Use) Regulations 1998, landlords in Islington must:

    • Have every gas appliance, fitting and flue checked by a Gas Safe registered engineer every 12 months
    • Give existing tenants a copy of the record within 28 days of the check, and new tenants before they move in
    • Keep each record for at least 2 years

    Renewing early: you can have the check done up to 2 months before the current certificate expires and keep the original renewal date, so you do not lose any months.

    📞 Book your landlord gas safety check in Islington: 0779 559 5757

    How Much Does a Gas Safety Certificate Cost in Islington?

    A gas safety check is charged at a fixed price confirmed before booking. The price depends on how many gas appliances the property has:

    • Standard gas safety check (boiler and hob): fixed price confirmed before booking
    • Additional appliances (gas fire, cooker, second boiler): included in the fixed price we confirm before booking
    • Repairs found during the check: quoted separately, before any work – see boiler repair in Islington

    If you also need an annual boiler service, ask when you book and we will confirm the price for both.

    Gas Safety Certificate in Islington

    Gas Safety in Islington Homes: What We Check Most

    Converted flats (Holloway, Archway, Highbury). Most Victorian houses in these streets are split into flats, each with a combi boiler in a kitchen or hallway cupboard. Where the boiler flue runs through a ceiling or boxed-in void, the engineer has to be able to see it along its whole length, so the flat needs inspection hatches. Without them, we cannot confirm the flue is safe.

    Period houses (Barnsbury, Canonbury, Angel). Georgian and early Victorian terraces often still have gas fires in the original fireplaces. These rely on the chimney and on enough fresh air in the room; a blocked chimney or a sealed-up air vent is one of the most common reasons an appliance fails the check.

    Carbon monoxide alarms. In rented homes in England, landlords must fit a CO alarm in every room with a fixed combustion appliance, such as a gas boiler or gas fire (gas cookers are exempt). We check this during the visit and tell you if one is missing.

    HMOs and licensed properties. If you hold an HMO or property licence from Islington Council, you will usually be asked for a current gas safety certificate when you apply or renew – book the check before your licence date.

    Postcodes we cover: N1 (Angel, Barnsbury, Canonbury, Islington), N5 (Highbury), N7 (Holloway), N19 (Archway, Upper Holloway), and the Islington parts of N4 (Finsbury Park) and EC1 (Clerkenwell, Finsbury).

    Areas We Cover Near Islington

    Besides Islington, we carry out gas safety checks across North and Central London, including:

    • Camden and Kentish Town
    • Hackney and Stoke Newington
    • Finsbury Park and Crouch End
    • King’s Cross and Clerkenwell
    • Barnet
    • All of London

    ➡️ View all Areas We Cover →

    🔗 Related Services in Islington

    Book Your Gas Certificate in Islington Today!

    Need a gas safety certificate in Islington before your current one runs out? Tell us how many gas appliances the property has and we will confirm a fixed price and an appointment time.

    📞 Call us now at 0779 559 5757
    📧 Email: info@ac-heating-plumbing.co.uk
    💬 Or Request a Quote Online

    Stay safe, stay compliant – book your CP12 check today.

    FAQs – Gas Safety Certificates in Islington

    How often must I renew my Gas Safety Certificate?

    For rented homes, the law requires a gas safety check every 12 months. You can have it done up to 2 months early and keep the original renewal date.

    How long does a typical gas inspection take?

    Most inspections take between 30 minutes and 1 hour, depending on the number of gas appliances.

    Can I book an evening or weekend appointment?

    Gas safety checks are usually booked during standard hours (Monday to Friday, 7:00–18:00). If you need a different time, ask when you book and we will confirm availability and the price before the visit.

    What happens if an appliance fails the check?

    The engineer explains the fault and, if the appliance is unsafe, makes it safe – usually by disconnecting it – with your permission. We then quote the repair before any work starts.

    Do I need a gas safety certificate to sell my flat?

    No, it is not a legal requirement for a sale. Some buyers and solicitors ask for a recent gas safety record, so it can help if your boiler has not been checked for a while.

    Do I need inspection hatches for my boiler flue?

    If the flue runs through a ceiling void or boxing, yes – the engineer must be able to inspect it along its length. This is common in converted flats in Islington.

    Need help today? Our Gas Safe registered engineers cover North & West London, with 24/7 emergency call-outs and clear pricing before any work starts.

    ⭐ Rated 4.8/5 on Google · Gas Safe registered · 15+ years’ experience

    📞 Call 0779 559 5757 💬 WhatsApp – reply in 15 min